『 HoneyCome come come party 』 Player Manual (2024)

Preface

Thank you for purchasing HoneyCome come come party for Windows 10/11.
Be sure to read this manual before playing the game.

Terms of Service

Make sure to read this before playing.

DISCLAIMER

○ILLGAMES may not be held responsible for any problems, losses, or damages incurred by the use of this game.
We recommend backing up your hard drive and your game, and that you use your best judgment in the game's operation.

○This game is a work of fiction!
Any names, organizations, locations, or events appearing in this game are fictitious. Any resemblance to real names, organizations, locations, events, etc. is purely coincidental.
This game is only intended for mature audiences of ages 18 and above. The purchase and play of it by minors under the age of 18 is expressly forbidden.All characters appearing in this game are over the age of 18.

PROHIBITED ACTIONS

○The unauthorized reproduction or distribution of all or part of this game, game data, or manual is illegal.
In addition, uploading or sharing this game on the Internet is expressly forbidden, as is the rental or resale, or any equivalent act.

○Streaming, distributing, selling, using this program for profit, and other similar uses are prohibited.
ILLGAMES holds the rights to all data created with this game, such as character data or game screenshots.

○This game includes scenes of graphic violence and criminal acts. Do NOT attempt to mimic or reproduce the things you see in this game in real life.
All acts depicted in this game are fully and mutually consensual, and completely fictional. Attempting to perform the actions seen in this game in real life may result in criminal litigation or arrest.

WARNING

○Do not sit or stand too close to your monitor.

○For health purposes, we recommend taking 10 to 15 minute breaks for every 1 to 2 hours you play.

NOTICE

○Playing games while tired or for long periods of time can be bad for your health. Remember: Your health comes first!
Consult with a physician before playing if you have ever experienced temporary loss of consciousness or seizures when watching TV, or as a result of any other strong source of stimulation.
If you experience these symptoms while playing, immediately turn off the game and consult with a physician.

Note: While all ©/™ symbols have been removed, all trademarked product names are the property of their registered owners.

System Requirements

    • Required
    • Recommended
    • OS
    • Windows 10 / 11 64bit *1
    • DirectX
    • DirectX 11
    • CPU
    • Intel Core i3 8100 *2
    • Intel Core i7 8700 *2
    • RAM
    • 8GB
    • 16GB
    • HDD
    • 20GB
    • GPU
    • NVIDIA GeForce GTX 1060 or AMD Radeon RX 480 or better *3
    • VRAM
    • 3GB *4
    • 6GB
    • Network
    • Requires an Internet connection.
    • Peripheral Equipment
    • Mouse (w/ mouse wheel), keyboard, monitor with resolution 1280 x 720 or higher (16:9 aspect ratio only)
  • *1 32-bit systems, touch controls, and virtual machines are not supported.
    *2 Intel CPUs are recommended.
    *3 A graphics card is required to play this game. Integrated graphics or a graphical system of similar power is not supported.
    *4 If only 3 GB of VRAM is available, please adjust the Quality setting under Graphic Settings in the Options menu.

    Caution: We may be unable to provide support for used or home-built PCs.
    Caution 2: Performance of this game on a laptop may be worse than on a desktop listing the same PC specs.

    Caution 3: Performance cannot be guaranteed on any OEM PC that has had its drivers updated or parts replaced.
    With all that being said, ILLGAMES will do its best to provide friendly and helpful customer support. However, we cannot guarantee this game's performance on every possible combination of PC part or driver.

    ・For troubleshooting problems with your computer, please contact your computer's manufacturer.
    •Be aware that the amount of unused hard drive space required may vary by system.
    •The game may not function properly with out-of-date drivers, even if your system meets the game requirements.

    [PC information]


    (1) Right-click the Windows mark at the bottom left of the screen => Select "Run".

    (2) Type dxdiag in the entry field and press "OK".

    (3) Press the "Save all information" button to save the information.

    (4) Please send "dxdiag.txt".

Basic Controls

  • ○Windows Controls
  • The following are descriptions of the basic game controls used in this manual.

    ①Left-Click : Press the left button on your mouse. ②Left-Click (Drag) : Press and hold the left mouse button and move the mouse.

    We often use the phrase "select the (X)" in this manual. For clarification, this is defined as moving your mouse to the item indicated by (X), then left-clicking it.
    For Example: The sentence "Select the Confirm button" indicates that you should move the mouse pointer over the Confirm button and left-click it.

    Note: Some operations may ask you to copy, move, or delete files from your computer. If you do not know how to perform these operations, please contact your computer manufacturer for help.

  • ○Camera Controls
  • The camera can be controlled in the character creation and sex scenes as long as the mouse cursor is not over a menu or button.
    『 HoneyCome come come party 』 Player Manual (2)『 HoneyCome come come party 』 Player Manual (3)『 HoneyCome come come party 』 Player Manual (4)『 HoneyCome come come party 』 Player Manual (5)『 HoneyCome come come party 』 Player Manual (6)
  • ○Adjusting the Slider/Colors
  • When adjusting slider variables using the mouse, you can also adjust the color by using the color panel. Note that the mouse cannot be used to adjust transparency in this way, as there is no transparency option on this screen.
    『 HoneyCome come come party 』 Player Manual (7)
  • ○Resetting Defaults
  • Use this button to quickly reset any modified settings to their defaults.
    『 HoneyCome come come party 』 Player Manual (8)
  • ○Check Boxes
  • Check boxes allow you to toggle options between ON and OFF.
    『 HoneyCome come come party 』 Player Manual (9)
  • ○Switching Categories
  • Spinning the mouse wheel while over certain menu options or icons (Sex Position Icon, Map Selection, etc.) allows you to adjust them.
    『 HoneyCome come come party 』 Player Manual (10)

The User Folder

  • The "UserData" folder can be found in the install directory for HoneyCome come come party. The game's saved data is stored across several folders nested within it.
  • [ bg ]Add any custom backgrounds* you want to use in Character Creation here.
    *Only images in the .png format are supported. A 16:9 aspect ratio is also recommended.

    [ cap ] This folder contains screenshots taken with the game's screenshot function.

    [ cardframe ] Foreground and background frames used in Character Creation are stored here.
    Foreground frames are stored in the "Front" folder, and background frames are stored in the "Back" folder.

    [ coordinate ] Stores the custom clothing sets saved in the Character Creation.

  • [ chara ]Stores character data that has been saved.
    Note: Within this folder, characters are divided into the "female" and "male" folders, depending on the gender of the character created.

    [ save ] This folder contains your saved game progress.

    [ ScreenEffect ] This folder contains the setting file for visual effects.

Title Screen

  • 『 HoneyCome come come party 』 Player Manual (15)
  • ■ PlayThis button starts the game.

    ■ Character CreationCreate custom characters to use in-game here.
    •FemaleOpens the Character Creation screen for female characters.
    •MaleOpens the Character Creation screen for male characters.
    •BackReturns to the previous screen.

    ■ UploaderShare your character data online.
    •Uploading Use this to upload your character data.
    •Download Use this to download character data shared online.
    •BackReturns to the previous screen.

    ■ OptionsAllows you to adjust game settings.

    ■ LanguageChanges the game language.

    ■ Exit GameExits the game.

Character Creation

■The Character Creation Screen

  • 『 HoneyCome come come party 』 Player Manual (22)
  • ①NameDisplays the name of the character currently being edited.
    Character name can be changed in the Character Settings section of the Options menu.

    ②Main MenuThe various customization categories. Select a button to open a more detailed list. (See "③Customization Options.")
    *From left to right: Face, Body, Hair, Outfit, Accessories, Settings

    ③Customization OptionsDisplays the sub-categories for the category selected in ②Main Menu.
    Clicking one will bring you to the ④Customization Panel.

    ④Customization PanelCustomize the sub-category selected from the ③Customization Options menu here.
    The many different customization options can be adjusted with buttons, sliders, etc.
    For more information, see Adjusting Facial and Body Features, Selecting Types and Colors, and Accessory Settings.
    Click (x) to hide the window. To display the window again, select the Customization Option again.
    Additionally, windows with (x) in the corner can be moved by left-clicking and dragging on the top of the window where the (x) is not displayed.

    ⑤Character ViewerDisplays the character currently being edited. Use the camera controls to rotate and view this character from any direction.

    ⑥Display OptionsAdjust various aspects of the character viewer, such as the character's expression and pose, the lighting, and the background image.
    Note that this is for viewing purposes only, and will not change how the character appears in the game.

    ⑦BackExits the Character Creation screen.
    Warning: Unsaved data in the character viewer will be lost.


■Adjusting Facial and Body Features (Sliders): Sliders are used to adjust the shape and size of facial and body features. The following is an example of how to use them to adjust a character's body.

  • 『 HoneyCome come come party 』 Player Manual (24)
  • ① Category SelectionSelect the Body icon from the Main Menu.

    ② Subcategory SelectionSelect the option you want to adjust from the menu on the left.

    ③ Slider AdjustmentAdjustable components and sliders will be displayed.
    Sliders can be adjusted directly or by entering a value to the slider's right.
    All sliders in the Facial and Body Features are adjusted in the same way.


■Selecting Types and Colors: Many options include sub-options to adjust their type or color. The following is an example of adjusting these properties for bangs.

  • 『 HoneyCome come come party 』 Player Manual (25)
  • ① Category SelectionSelect the Hair icon from the Main Menu.

    ② Subcategory SelectionSelect "Bangs Settings" from the menu on the left.

    ③ Option Menu SelectionSelect "Type" from the Customization Panel.

    ④ Option SelectionA list of bang options will be displayed. Select a type of bangs.

    ⑤ Color Menu SelectionSelect "Color" from the Customization Panel.

    ⑥ Color SelectionSelect the option showing color for an item you want to adjust.

    ⑦ Color AdjustmentThe Color Panel will be displayed. Use the Picker, Sliders, or Presets to change the color.
    ・Some clothes and accessories also have secondary color options.
    ・Some items have a transparency option. Adjust this with the "Transparency" slider.


■Customizing Hair:Entirely new hairstyles can be created by adjusting hair settings. Note that some hairstyles have different customization options.

  • 『 HoneyCome come come party 』 Player Manual (26)
  • ① Category SelectionSelect the Hair icon from the Main Menu.

    ② Subcategory SelectionSelect the hairstyle to adjust from the Customization Panel.

    ③ Option Menu SelectionSelect "Settings" from the Customization Panel.

    ④ Position AdjustmentCustomize settings here to adjust the selected hairstyle.

  • ■The Axis: You can directly control object position with the Axis.
  • 『 HoneyCome come come party 』 Player Manual (27)
  • ①Enable the Axis.An axis controller will appear when you enable the "Axis" box.
    ※With this enabled, you can left-click and drag the mouse to move and rotate the selected section of hair.

    ②Move/RotateSwitches between types of Axis movement.

    ③Speed/Size・Speed Affects how quickly the object will move when manipulated.
    •Size Affects the size of the Axis.

  • Sample Hair: This sample uses the Curly Side Bangs hairstyle for the Bangs.
  • 『 HoneyCome come come party 』 Player Manual (28)『 HoneyCome come come party 』 Player Manual (29)『 HoneyCome come come party 』 Player Manual (30)『 HoneyCome come come party 』 Player Manual (31)
  • ■Mesh: By customizing a mesh for the bangs, you can adjust them in various ways. For example, by adding color to one specific segment.
  • 『 HoneyCome come come party 』 Player Manual (32)
  • ① Mesh Color SelectionSelect "Set Mesh Color" from the "Hair Settings" panel.

    ② Color SelectionSelect "Color."

    ③ Color AdjustmentChoose a mesh color from the Color Panel.


■Clothing Settings: Shirts, underwear, and other clothing types can be customized from this screen.

  • 『 HoneyCome come come party 』 Player Manual (33)
  • ① Category SelectionSelect the clothing category to edit from the menu on the left.

    ② Subcategory SelectionSelect "Top" from the menu on the left.

    ③ Clothing SelectionSelect "Type" from the "Top Settings" panel.

    ④ Option Menu SelectionSelect "Type" from the Customization Panel.

    ⑤ Option SelectionPick clothing from the list displayed.

    ⑥ PatternsSelect "Pattern" (etc.) to customize the color/pattern of that part of the outfit.
    Note that some items have different color customization options.


■Accessory Settings: A maximum of 20 accessories can be worn at any time, and their size and position can be customized. The following example shows how to move glasses to a character's head.

  • 『 HoneyCome come come party 』 Player Manual (34)
  • ① Category SelectionSelect the Accessories icon from the Main Menu.

    ② Slot SelectionSelect a slot. In this example, Slot 01 is selected.

    ③ Display Category ListSelect an accessory category. In this example, "Face" is selected.

    ④ Option Menu SelectionSelect "Type" from the Customization Panel.

    ⑤ Setting Menu SelectionType, color, position, and more are all separated by easy-to-use tabs.
    In this example, "Type" is selected.

    ⑥ Option SelectionA list of accessories will be displayed for the selected category. Select an accessory.

    ⑦ Display Customization MenuSelect "Settings."

    ⑧ Position/Size AdjustmentVarious customization options are displayed. Here, we will adjust settings in "01 Settings."
    Adjust the various X, Y, and Z positions by left-clicking and dragging, or by entering a value.
    •Position (X Axis)Adjusts the object's horizontal position.
    •Position (Y Axis)Adjusts the object's vertical position.
    •Position (Z Axis)Adjusts the object's depth.
    •Rotation (X Axis)Rotates the object horizontally.
    •Rotation (Y Axis)Rotates the object vertically.
    •Rotation (Z Axis)Rotates the object clockwise.
    •Size (X Axis)Adjusts the object's horizontal size.
    •Size (Y Axis)Adjusts the object's vertical size.
    •Size (Z Axis)Adjusts the object's thickness.

    Some accessories may display additional customizable options. These are listed as "02 Settings," etc.
    The color can be adjusted via the Color tab.
    Adjusting the object's Base Position changes the focal point that the object moves in tandem with.
    The position, size, and angle of objects can be adjusted via the Settings tab.

  • ■The Axis: You can directly control object position with the Axis.
  • 『 HoneyCome come come party 』 Player Manual (35)
  • ①Enable the Axis.An axis controller will appear when you enable the "Display Axis" box.
    With this enabled, you can left-click and drag the mouse to move and rotate the accessory.

    ②Move/RotateSwitches between types of Axis movement.

    ③Speed/Size・Speed Affects how quickly the object will move when manipulated.
    •Size Affects the size of the Axis.

  • ●Make Copy: This option allows you to duplicate accessories or copy customized accessory settings into another accessory slot.
  • 『 HoneyCome come come party 』 Player Manual (36)
  • ① Menu SelectionAfter customizing an accessory, select "make Copy" from the menu on the left.

    ② Copy Source SelectionSelect the Accessory Slot to copy the values from.

    ③ Copy Destination SelectionSelect the Accessory Slot to copy the values to.

    ④ Apply ButtonCopies the accessory in the Copy Source to the Paste Destination.
    •Flip Position For objects with left/right base positions (e.g. ears), enabling this and selecting "Copy slot" will copy the accessory, but with the opposing base position.

    Copy Source Values •Settings Copies only the adjusted values from the copy source.
    •Reverse (←→)Flips the Rotation value (Rotate Y) in the copy source and copies it to the copy destination.
    •Reverse (↑↓) Flips the Rotation value (Rotate X) in the copy source and copies it to the copy destination.


■Saving and Deleting Outfits: Outfits allow you to manage custom combinations of clothes and accessories.

  • ●Creating New Outfit Cards
  • 『 HoneyCome come come party 』 Player Manual (37)
  • ① Category SelectionSelect the Options icon from the Main Menu.

    ② Menu SelectionSelect "Save/Delete" in the Outfit Card sub-category.

    ③ Action OptionsSelect "Save As New" in the Customization Panel. A window to name this outfit will be displayed.

    ④ Name Entry FieldEnter an outfit card name.

    ⑤ Confirm ButtonSelect "Confirm" to save the outfit card.
    Outfit cards are saved in the "Coordinate" folder.

  • ●Overwriting Outfit Cards
  • 『 HoneyCome come come party 』 Player Manual (39)
  • ① Category SelectionSelect the Options icon from the Main Menu.

    ② Menu SelectionSelect "Save/Delete" in the Outfit Card sub-category.

    ③ Target SelectionSelect the outfit card to overwrite from the Outfit Card List.

    ④ Action OptionsSelect "Overwrite." A confirmation window will be displayed.

    ⑤ Name Entry FieldEdit the outfit card name (optional).

    ⑥ Confirm ButtonSelect "Confirm" to overwrite the outfit card.

  • ●Deleting Outfit Cards
  • 『 HoneyCome come come party 』 Player Manual (40)
  • ① Category SelectionSelect the Options icon from the Main Menu.

    ② Menu SelectionSelect "Save/Delete" in the Outfit Card sub-category.

    ③ Target SelectionSelect the outfit card to delete from the Outfit Card List.

    ④ Action OptionsSelect "Delete." A confirmation window will be displayed.

    ⑤ Delete ButtonSelect "Delete" on the confirmation screen to delete the selected outfit card.
    Warning: This will delete the outfit data from your computer, not just the game.


■Loading Outfits: You can load saved outfit cards in full, or only certain aspects of them.

  • 『 HoneyCome come come party 』 Player Manual (41)
  • ① Category SelectionSelect the Options icon from the Main Menu.

    ② Menu SelectionSelect "Load" from the Outfit Card section of the menu.

    ③ Target SelectionSelect the outfit to load from the Outfit Card List.

    ④ Category to LoadCustomize the parts of the outfit to load.

    ⑤ Action OptionsLoads the selected Outfit.


■Character Settings: These settings allow you to adjust a character's name, voice, and other settings.

  • 『 HoneyCome come come party 』 Player Manual (42)
  • ① Category SelectionSelect the Character Settings icon from the Main Menu.

    ② Character ProfileSub-categories in the Character Settings menu can be adjusted.
    •Character Determines various character profile.
    ├ SettingsSets the character's name and birthday.
    └ Type Determines the character's personality and voice. A voice sample will play when selecting one.

    ③ Other SettingsIn the "Other Settings" section, you can add the "Fang" and "Futanari" attributes.


■Saving/Deleting Characters: When saving a character, you must also create a preview portrait.

  • ●Saving New Characters
  • 『 HoneyCome come come party 』 Player Manual (43)
  • ① Category SelectionSelect the Options icon from the Main Menu.

    ② Menu SelectionSelect "Save/Delete" in the Character Card sub-category.

    ③ Action OptionsSelect "Save As New" in the Customization Panel to open the Photo Mode.

    ④ Camera MenuCustomize your character's portrait by adjusting their expression, pose, the portrait frame, etc. with these options.

    ⑤ Picture FrameUse the camera to adjust the character's position etc. within the frame.

    ⑥ Snap a Picture and SaveClick this to create the character card.
    Character cards are stored in the "Chara" folder.

  • ●Overwriting Characters
  • 『 HoneyCome come come party 』 Player Manual (45)
  • ① Category SelectionSelect the Options icon from the Main Menu.

    ② Menu SelectionSelect "Save/Delete" in the Character Card sub-category.

    ③ Target SelectionSelect the character card to overwrite from the list.
    Note : Overwriting a character will revert their parameters to default values.

    ④ Action OptionsSelect "Overwrite." A confirmation window will be displayed.

    ⑤ OverwriteSelect "Change and Save" to move to the Photo Mode.
    Be aware that character data will be overwritten when you save in the Photo Mode.

  • ●Deleting Characters
  • 『 HoneyCome come come party 』 Player Manual (47)
  • ① Category SelectionSelect the Options icon from the Main Menu.

    ② Menu SelectionSelect "Save/Delete" in the Character Card sub-category.

    ③ Target SelectionSelect the character card to delete from the list.

    ④ Action OptionsSelect "Delete." A confirmation window will be displayed.

    ⑤ Delete ButtonSelecting "Delete" on the confirmation screen will delete the character card.
    Warning: This will delete the outfit data from your computer, not just the game.


■Loading Characters: Saved characters can be loaded in their entirety, or you can load just their outfit or appearance.

  • 『 HoneyCome come come party 』 Player Manual (48)
  • ① Category SelectionSelect the Options icon from the Main Menu.

    ② Menu SelectionSelect "Load" in the Character Card sub-category.

    ③ Target SelectionSelect the character card to load from the list.

    ④ Category to LoadCustomize the character properties to load.

    ⑤ Action OptionsClick here to load the selected character data.
    Be aware that any unsaved customizations/data will be lost upon loading.


■Merging Characters: Two characters can be merged, combining aspects of each of them to create a new whole.

  • 『 HoneyCome come come party 』 Player Manual (49)
  • ① Category SelectionSelect the Quick Creation icon from the Main Menu.

    ② MergeSelect "Merge" in the Character Card sub-category.

    ③ Character Card ASelect the first character (character A) from the list.

    ④ Character Card BSelect the second character (character B) from the list.

    ⑤ Fuse ButtonClick here to merge character A and character B.

    ⑥ Fused CharacterYou will see the newly-created character here.
    Note that outfits will not be mixed and matched. The final outcome will use one of the two characters' outfits in its entirety.

    ⑦ Exit ButtonClick here to exit the Merge screen.


■Generate Image:This allows you to specify a character type and general appearance during Quick Creation.

  • 『 HoneyCome come come party 』 Player Manual (50)
  • ① Category SelectionSelect the Quick Creation icon from the Main Menu.

    ② Generate ImageSelect "Generate Image" in the Character Card sub-category.

    ③ OptionsSelect the options that match the character you want to create.

    ④ Generate (All Conditions)Generates a character using all of your selected specifications.

    ⑤ Randomize ImageRandomizes options in the Image window and generates a character.

    ⑥ Randomize AllRandomizes all options and generates a character.

    ⑦ ResetReverts to the state before generating a character.

    ⑧ Generate ImageClick here to exit the Generate Image screen.


■Creating Male Characters: Character creation for both male and female characters is almost exactly the same.

  • 『 HoneyCome come come party 』 Player Manual (51)
  • Follow the previous guide to learn how to create male characters. (Character Creation)

■Futanari Characters

  • 『 HoneyCome come come party 』 Player Manual (53)
  • Checking the "Futanari" box will allow you to choose that female character as a male character.
    For more information, see "Selecting a Character."
    *Enabling this will not affect the character when they are selected as a sexual partner.

The Uploader

■The Uploader allows you to upload data you created, or download data uploaded by others.

  • 『 HoneyCome come come party 』 Player Manual (55)
  • To use the uploader, you need to register your handle name.
    Enter the "handle name" and select "Apply".
  • ○The Uploader:Here you can upload data created in game.
  • 『 HoneyCome come come party 』 Player Manual (56)
  • ① Toggle Data DisplayAdjusts the type of data displayed in ②Data List.
    『 HoneyCome come come party 』 Player Manual (57)Displays a list of male characters.
    『 HoneyCome come come party 』 Player Manual (58)Displays a list of female characters.

    ② Data ListDisplays a list of created data.

    ③ Data PreviewDisplays a preview image of the data selected in ②Data List.

    ④ CommentEnter a comment for the data to upload here. Cannot be left blank, max character limit of 80.

    ⑤ UploadUploads the data.
    ・The button will display "Update" instead of "Upload" for characters that have been uploaded before.

    ⑥ DownloaderSelecting this brings you to the Downloader screen.

  • ○The Downloader:Here you can view a list of data others have uploaded and download it.
  • 『 HoneyCome come come party 』 Player Manual (59)
  • ①Shared Menu・Information on Selected DataDisplays information on the data selected in ②Data List.
    ・MenuChanges for the selected content.
    ・Search FiltersAdjusts the search conditions to filter displayed results in ②Data List.
    ・The UploaderSelecting this brings you to the Uploader screen.
    ・TitleSelecting this returns you to the Title screen.

    ②Data ListDisplays a list of uploaded data.

    ③Navigate PageNavigates between pages on the ②Data List.
    『 HoneyCome come come party 』 Player Manual (60) / 『 HoneyCome come come party 』 Player Manual (61)Move to previous/next page.
    『 HoneyCome come come party 』 Player Manual (62) / 『 HoneyCome come come party 』 Player Manual (63)Move to first/last page.
    ・ x/xDisplays the current/total page #.

    ④ System・DownloadDownloads the data selected in ②Data List.
    ・Update ListReconnects to the uploader to update with the latest data.
    ・Delete CacheDeletes the cache for the currently active downloader.
    Image data you have viewed is saved in your game's cache. Deleting this data will free up memory on your HDD, but may cause image data to load more slowly.

  • ○Data Uploaded:Check data you've uploaded here, or delete data from the Uploader.
  • 『 HoneyCome come come party 』 Player Manual (64)
  • ①Data ListDisplays a list of uploaded data.

    ② DeleteDeletes the selected data from the uploader.

Sex Scene

This option allows you to enjoy sex with your choice of character and map.

  • 『 HoneyCome come come party 』 Player Manual (65)
  • ① Select FemaleSelect a female from the game's "chara" folder, and set their status here.
    Specifying a second partner will unlock threesomes and girl-on-girl sex options during sex scenes.

    ② Select MaleSelect a male from the game's "chara" folder, and set their status here.
    Specifying a second partner will unlock threesomes sex options during sex scenes.

    ③ Select MapMoves you to the Map Selection screen.

    ④ Select a MapSelect a location from the Map List here.

    ⑤ Confirm Map & BeginInitiates a Sex Scene with the selected settings.

    『 HoneyCome come come party 』 Player Manual (67)(Back)Returns to the previous screen.

Sex Scenes : During sex scenes, you can enjoy an intimate time with your partner.

  • 『 HoneyCome come come party 』 Player Manual (68)
  • ① Sex CategoryToggle between sexual categories. Selecting one opens up a list of available sex positions.

    ② Sex PositionSelect the desired sex position here.

    ③ Character ViewerYou have full 360 degree control of your camera here.

    ④ Control TooltipDisplays controls for the sex scene.

    ⑤ Sex LocationAllows you to move to set points on the map, or manually adjust your position.

  • ⑥ Pleasure Gauge/Finish Button『 HoneyCome come come party 』 Player Manual (71)
  • ⑦ Sex Options 『 HoneyCome come come party 』 Player Manual (72)Adjust your partner's clothing.
    『 HoneyCome come come party 』 Player Manual (73)Hide/display your partner's accessories.
    『 HoneyCome come come party 』 Player Manual (74)Change the player or partner's appearance by loading an outfit card.
    *Select a character name to specify who changes apply to.

    『 HoneyCome come come party 』 Player Manual (75)Adjusts gloss/wetness/lethargy.
    『 HoneyCome come come party 』 Player Manual (76)Adjusts scene lighting.
    『 HoneyCome come come party 』 Player Manual (77)Adjusts visual effects.
    『 HoneyCome come come party 』 Player Manual (79)Open the Settings screen to customize game settings.

    ⑧ Exit Sex SceneExits the sex scene.

  • ■ Sex Scene Controls: Caress/Masturbation
  • 1. Begin caress and raise your partner's Pleasure Gauge.『 HoneyCome come come party 』 Player Manual (82)Adjust speed to find the right pace, and watch the gauge go up.

    2. Your partner will climax once the gauge fills up.『 HoneyCome come come party 』 Player Manual (83)

  • ■ Sex Scene Controls: Foreplay
  • 1. Begin foreplay and watch your Pleasure Gauge increase.『 HoneyCome come come party 』 Player Manual (84)

    2. The Orgasm Button will display once the gauge reaches the marker point.『 HoneyCome come come party 』 Player Manual (85)

    3. Select the Orgasm Button to climax.『 HoneyCome come come party 』 Player Manual (86)

  • ■ Sex Scene Controls: Penetration
  • 1. Begin foreplay to raise the Pleasure Gauge.『 HoneyCome come come party 』 Player Manual (87)Adjust speed to find the right pace, and watch the Gauge go up.

    2. The Orgasm Button will display once the gauge reaches the marker point.『 HoneyCome come come party 』 Player Manual (88)

    3. Select the Orgasm Button to climax.『 HoneyCome come come party 』 Player Manual (89)

    Pull out after cumming together, and...『 HoneyCome come come party 』 Player Manual (90)

Sex Location : Allows you to move to set points on the map, or manually adjust your position.

  • 『 HoneyCome come come party 』 Player Manual (91)
  • ① Switch PointsSwitches between preset locations on the map.

    ② Manual MovementManually move your location.
    Selecting this displays ③.

  • ③ Movement ControlsLeft-click and drag on each icon to move/rotate.
    『 HoneyCome come come party 』 Player Manual (92)Left/Right/Front/Back
    『 HoneyCome come come party 』 Player Manual (93)Up/Down
    『 HoneyCome come come party 』 Player Manual (94)Rotate
    『 HoneyCome come come party 』 Player Manual (95)Adjust movement speed

Visual Effects : You can control the game's visual effects.

  • 『 HoneyCome come come party 』 Player Manual (96)
  • ① Toggle Visual SettingsSelecting this opens a menu to customize visual settings.

    ② Visual Effect MenuA menu that controls various visual options. (Connects to ③)

    ③ Configure Visual OptionsA second menu that controls various visual options.

    ■PresetsSave and load visual configuration layouts.
    *Configuration files are saved in the "ScreenEffect" folder.

    ■BloomAdjusts light blurring.

    ■Depth of FieldAffects blurriness of objects as they grow more distant from the camera.

  • ■VignettesDarkens the edges of the screen.

    ■SSAOAdjusts shadow effects.

    ■FogConfigures fog.

Keyboard Shortcuts

  • Press the F2 key to open the shortcut menu. *Note that screenshots are saved to the UserData->cap folder in your installation directory.

    ■ Character Creation Keyboard Shortcuts『 HoneyCome come come party 』 Player Manual (99)

    ■ Sex Scene Keyboard Shortcuts『 HoneyCome come come party 』 Player Manual (100)

Options

  • 『 HoneyCome come come party 』 Player Manual (101)
  • ① MenuClick a category to display it.

    ②ExitExits the Options menu.

    ③Settings ■Camera Settings: These affect camera controls.

    ■Screen Settings: Adjusts screen resolution and Windowed Mode settings.

    ■Graphic Settings: These affect game visuals.
    These settings affect game performance. If your game runs slowly, disabling some of these may help improve performance.

    •Quality

    Adjusts the overall level of graphic quality.

    •SSAO

    Adjusts shadow effects.

    •Fog

    Configures fog.

    •Depth of Field

    Affects blurriness of objects as they grow more distant from the camera.

    •Bloom

    Toggles gradation and blurring from lighting effects.

    •Vignettes

    Darkens the edges of the screen.

    •Environmental Lighting

    Adjusts the light source.

    •Map

    Toggle the map.

    •Obstructions

    Affects whether objects between your POV and the camera are displayed.

    •Background Color

    Adjusts the color of the background shown when no other background is available.

    ■Audio Settings: These affect the volume of the BGM and SE.

    ■Voice Settings: Allows you to configure voice settings by personality.

    ■Game Settings: These affect various aspects of gameplay.

    •Display Pleasure Gauge

    Toggles the display of the Pleasure Gauge.

    •Control Tooltip

    Toggles display of control tool tips on screen.

    •Reset Camera Determination

    Enabling this automatically sets the camera to a predetermined angle when changing sex positions.

    ・Display Player

    Toggles the display of the player 1.

    ・Display Player Penis

    Toggles the display of the player 1 penis.

    ・Display Player Clothes

    Toggles the display of the player 1 clothing.

    ・Display Player Accessories

    Toggles the display of the player 1 accessories.

    ・Display Player Shoes

    Toggles the display of the player 1 shoes.

    ・Display Player 2

    Toggles the display of the player 2.

    ・Display Player 2 Penis

    Toggles the display of the player 2 penis.

    ・Display Player 2 Clothes

    Toggles the display of the player 2 clothing.

    ・Display Player 2 Accessories

    Toggles the display of the player 2 accessories.

    ・Display Player 2 Shoes

    Toggles the display of the player 2 shoes.

    ・Display Player Base Color

    Toggles whether the player is displayed as a simple color, and what that color is.

    ・Cum/Urine/Squirting

    Toggles the display of these effects.

    •Eyes Track Camera (Char 1)

    Adjusts the direction NPC 1's eyes are looking.

    •Head Tracks Camera (Char 1)

    Adjusts the direction NPC 1's head faces.

    •Eyes Track Camera (Char 2)

    Adjusts the direction NPC 2's eyes are looking.

    •Head Tracks Camera (Char 2)

    Adjusts the direction NPC 2's head faces.

Troubleshooting

  • If the game won't run, or if the game doesn't work properly even when following the instructions in the manual, try one of the following common solutions.

    Problem : The game won't load, it suddenly freezes, or it runs poorly.

    When the game won't run properly, it's usually because your system doesn't meet the minimum system requirements.
    Before you try anything else, double-check to make sure your computer is powerful enough to run HoneyCome come come party
    You can find HoneyCome come come party's system requirements on your game's packaging, or see them here.

    Warning: Follow the suggestions below at your own risk.
    ILLGAMES cannot be held responsible for any problems that occur from installing drivers. We will do our best to provide technical support, but any accidents that occur are the user's responsibility.
    If you are unsure of how to install drivers or perform any of the following tasks, please contact your computer manufacturer for assistance.

    (1) Update graphics card drivers
    If your computer meets the game's system requirements but the game has trouble running, the problem is often out-of-date graphics drivers.
    For information on how to update your graphics card drivers, please contact your computer or graphics card manufacturer for assistance.
    You can also try changing the game's Options to switching graphics settings, or changing to Windowed Mode.

    (2) Disable background programs
    Antivirus software and other background programs may interfere with the game's performance. Temporarily disable these types of programs before booting the game.
    For information on how to disable these programs, please refer to the corresponding software's manual.

    (3) Update computer drivers
    The motherboard or sound card may be causing the problems you're experiencing.
    Try updating all your computer's drivers to the latest versions.
    For information on how to do this, please contact your computer or hardware manufacturer for assistance.

    (4) Reinstall Windows
    Windows itself could be experiencing problems. Backing up your computer, reformatting your hard drive, and reinstalling Windows may solve the problem.
    Warning: Take great care to fully backup all of your data first. ILLGAMES cannot be held responsible for any loss of data.
    For information on how to reformat your hard drive and reinstall Windows, please contact Microsoft for assistance.


  • If you're still experiencing problems...

    The solutions listed above should solve most problems that you may experience. If you have any questions, please send an e-mail to our Online Support.
    When you send an e-mail, save and include a copy of your System Information details, or include a text file with your system information.

    E-Mail : support@illgames.jp


  • Privacy Policy

    ILLGAMES handles all personal information, such as names, addresses, and e-mail, with the utmost care, and will not share your information with any third parties.
『 HoneyCome come come party 』 Player Manual (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Kerri Lueilwitz

Last Updated:

Views: 5933

Rating: 4.7 / 5 (67 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Kerri Lueilwitz

Birthday: 1992-10-31

Address: Suite 878 3699 Chantelle Roads, Colebury, NC 68599

Phone: +6111989609516

Job: Chief Farming Manager

Hobby: Mycology, Stone skipping, Dowsing, Whittling, Taxidermy, Sand art, Roller skating

Introduction: My name is Kerri Lueilwitz, I am a courageous, gentle, quaint, thankful, outstanding, brave, vast person who loves writing and wants to share my knowledge and understanding with you.